Module for AC Converter

Module for AC Converter

Order number

M83200

Availability

Usually in stock

Accessories

Documents

Download PDF

The module M83200 converts AC signal inputs into pulse outputs and provides configurable 5 V outputs.

The module M83200 contains:

  • 4 independent AC signal converters
    • To adapt low amplitude AC (e.g. sinusoidal) signals of various sensors to the counter inputs of Meteo-40 plus data loggers. The sinusoidal signal is converted in a rectangular pulse signal with the same frequency.
  • 2 individually configurable ports with the following configuration options:
    • Current limit to 10 mA (470 Ω)
    • Pull-up resistor 5.1 kΩ with current limit 1 mA
    • Stabilised and ripple-free 5 V output with active current limit 110 mA
Electrical characteristics (Default settings)
Parameter Pin / Ports Min Typical Max
Supply voltage (DC)
Quiescent current
13 9 V
11 mA
  32 V
16 mA
Ground GND 15      
Configurable Outputs
Output (5 V DC) (ϑ = 25°C) 14, 16 5.2 V
110 mA
  5.8 V
130 mA
Pull-up current limit 1 mA
(Low current configuration 5.1 kΩ)
14, 16 0.97 mA   1.05 mA
Pull-up current limit 10 mA
(High current configuration)
14, 16 10.5 mA   11.4 mA
AC Voltage Converters
Input sensitivity of converter 2, 3, 6, 7 115 mV   120 mV
Ground GND 4, 8      
Output level low 9, 10, 11, 12 0 V   0.01 V
Output level high 9, 10, 11, 12 5 V   5.8 V
Operating temperature   -40°C   +75°C
Fuse T0.8A (time lag, slow-blow): 5 x 20 mm

Housing dimension (width x height x depth): 22.5 x 110 x 115 mm
Mounting on DIN-rail (35 x 7.5 mm)
Terminal: wire cross section from 0.25 to 1.5 mm²
Terminal Earth: recommended wire cross section 1.5 mm²
(Keep wire length as short as possible)